Cross Knurled T Cabinet Knob and Backplate

Regular cleaning is recommended and easy to do. Use a damp microfibre cloth to gently clean your product. If you experience a stubborn stain, grab a soft-bristled toothbrush to remove anything trapped in the knurling. We strongly advise against using cleaning products and soaps on products as they may be harmful to the lacquer and overall appearance. Scrubbers and brushes with metal bristles should also be avoided.

When cleaning something close to your Buster + Punch product, a door or drawer front for example, take care to avoid cross-contamination if you’re using a cleaning product or soap. If you get any onto the metal, wash off with warm water and a soft cloth.

Most cabinet hardware includes screws for 3/4" thick panels. For thicker cabinets, longer screws can be purchased separately either through us or your nearest hardware store.

Most cabinet pulls are sized by the center to center. This is the distance from the center of one hole to the center of the other hole. Length is the overall length of the pull from tip to tip.

1-1/4" is the most common size knob. For drawer pulls, we often recommend using a pull approximately 1/3 the length of the drawer. For cabinet doors, 5" - 6.5" works well for most cabinets. If your upper cabinets are extra tall, 8" may be more suitable. Click here for our complete guide.

Using a mixture of knobs and pulls can help make your space feel more custom. A safe go-to is knobs on doors and pulls on drawers, but there are many other options that look nice as well. Click here for our complete guide.